Some users are prone to problems when using electric spindles, sometimes due to the operator's unfamiliarity with the electric spindle or problems with the method, and sometimes due to problems during installation, cleaning, and maintenance that were not resolved in a timely manner before being put into use. No matter what the reason is, it will have adverse effects. In order to reduce these mistakes, it is necessary to avoid improper operations. Below we will tell you how to reduceElectric spindleThe error rate of use.

How to reduce the error rate of using an electric spindle

1. We should connect the inlet and outlet pipes of the electric spindle according to the corresponding requirements, and check for any water leakage. The cooling system should run continuously from start-up to shutdown. He should use a separate water tank for the coolant, and the coolant should be replaced every month. We need to match the power, frequency, and voltage of the frequency converter and the electric spindle. The current of the frequency converter should be set according to the current of the electric spindle.

2. When installing the electric spindle, all taper holes on the spindle head should be cleaned thoroughly, and the dirt on the surface of the spring clamp should also be cleaned to effectively prevent a decrease in accuracy. The electric spindle manufacturer reminds everyone not to apply too much force when clamping the electric spindle nut. In addition, the bearings that come into contact with the ball have a limited speed limit, and the electric spindle cannot exceed the speed limit, otherwise it will burn out the bearings of the precision contactor.

3. If we hear abnormal sounds inside the electric spindle, we should check and feel if there is any heating or vibration in the electric spindle. If that's the case, we should shut down and check if the quality during the processing is stable.

The above are methods to reduce the error rate of using electric spindles.