High speed electric spindleThe zero error operation has a significant impact on the service life and operating efficiency of the electric spindle. In order to help you better grasp the relevant knowledge in this area, the following brief explanation may provide some insights.

We need to connect the inlet and outlet pipes of the electric spindle according to the corresponding requirements, and we need to check if there is any leakage. The cooling system needs to work continuously from start-up to shutdown. The coolant needs to be stored in a separate water tank and replaced monthly. We need to use the power, frequency, and voltage of the inverter and electric spindle. The current of the frequency converter should be set according to the current of the electric spindle. When loading tools on high-speed electric spindles, it is necessary to clean the taper holes on the spindle head and the dirt on the surface of the spring chuck to prevent a decrease in accuracy. We should be careful not to use too much force.

If there is any abnormal noise from the high-speed electric spindle, we need to check for heating and vibration. If there is, we need to turn it off for inspection, and then we need to see if its temperature is unstable during the processing.