Electric spindleIt is necessary to equip the cooling device with water cooling or oil cooling. Water cooling is a better cooling method, but it is necessary to add rust inhibitors to the cooling water. Oil cooling is not as effective as water cooling, but there is no need to worry about rusting of the spindle. Pay attention to the spindle speed, the achievable spindle speed should not be operated for a long time. The processing speed of practice is generally 80% of the speed, depending on the application time.

If the customer requiresElectric spindleLow speed machining, generally not less than 10% of the speed, otherwise the actual cutting rate will be lower. If the customer still requires greater torque at low speeds, we recommend using the optional dual coil motor spindle, which can also be used for high-speed and low-speed machining, but at a higher cost. Generally, the spindle taper is HSK or BBT standard at high speeds, mainly because the rigidity of the spindle handle is better connected to the spindle, and the influence of centrifugal force is smaller. Shenzhen Shunyuan Precision Machinery Co., Ltd. is a company dedicated to precision manufacturingElectric spindleWe are a high-tech enterprise that integrates research and development, manufacturing, sales, and maintenance. Our products are sold well in Shenzhen, Guangzhou, Dongguan, Shanghai, Jiangsu, Hubei, Fujian, Henan, and other places.