Constant power electric spindleMaintenance requirements:

1. What should be done is to strictly follow the requirements of the instruction manual during and before use. Moreover, there are certain requirements for operators, which is to have a fundamental understanding of the equipment and accessories. During this process, various parameters such as the rated power and speed of the equipment must be included, and excessive operation must be avoided. And after the operation is completed, the corresponding equipment should be turned off in a timely manner, especially after turning off, attention should be paid to the condition of the rotor to prevent it from getting stuck as much as possible. If it gets stuck, it will cause serious damage to the constant power electric spindle.

2. During regular maintenance, it is necessary to have reliable cooling conditions. There are two common cooling methods: liquid and air. When using the former, it is important to check the condition of the coolant in a timely manner. When using it, it is necessary to replace it in a timely manner. When replacing the coolant, try to choose a trustworthy brand; When using the latter, it is necessary to regularly inspect the refrigeration system to avoid the inability to cool the equipment in the event of a malfunction.

Precautions for maintenance of constant power electric spindle:

1. For operators, after using it every day, they need to use vacuum cleaners and other equipment to clean the waste inside it in a timely manner, to prevent these wastes from entering the interior of this accessory, causing wear and tear during high-speed operation, and even entering the circuit board and other areas, causing motor short circuits and burning.

2. When performing or replacing props on a constant power electric spindle, the operator must disassemble the relevant parts and cannot directly use the operating equipment for replacement. Then, after turning on the machine every day, the operator must check whether the cooling water of this accessory is working normally, especially paying attention to whether the cooling water is contaminated by scale or other substances. If this situation occurs, the cooling water should be replaced in a timely manner. And, it is also necessary to check whether there are any abnormalities in the pipeline status to ensure that the cooling water can circulate normally. If there is no cooling water in the accessories, the machine must not be operated.